|
Registered
Join Date: Nov 2001
Location: Central Kentucky
Posts: 729
|
The nuts requiure various combinations of 12 or 13 mm flex sockets (depends on whether they are original or replaced) especially helped by a flex extension or a 6" wobble extension. There is a special tool for the barrel nuts but pick up a set of Harbor Freights inexpensive "ball end" Allen wrenchs and the (I think) 8 mm fits and allows you to get in to the sometimes off angle barrel (off angle in relation to the access hole in the HE. Some folks bend a 12 or 13 long box wrench for accessing the nuts as well
__________________
Richard Lane
1978 911SC
1973 "Clean" RS clone
|