|
Can't get bolt out of calipers on '01 Grand Cherokee
Trying to replace rotors/pads on the front of my wife's JGC and the 13mm bolts holding the calipers on refuse to budge (first time i've felt an open ended wrench actually stretch!). I've hit it a few times with PB Blaster but no luck.
Can't fit the impact gun in there either.
What do i do here?
And, should i be prepared with replacement 13mm bolts? Is grade 8 from Home Depot appropriate for this?
Thanks,
Erik
__________________
*****************************************
Well i had #6 adjusted perfectly but then just before i tightened it a butterfly in Zimbabwe farted and now i have to start all over again!
I believe we all make mistakes but I will not validate your poor choices and/or perversions and subsidize the results your actions.
|