Quote:
Originally Posted by cab83_750
1. I have a moving-dolley with a plywood nailed on top of it.
2. I have marked the center of the bottom of the dolley so that when I put the dolley on top of the jack, it is already centered.
3. With the dolley on the jack, I start raising the jack.
Cheers!
|
I may be thick (as a plank) but what would (wood) a moving dolley with plywood on top look like. May be some terminology issues here - we use some different words down under for the same things - but I can't picture it.
Sounds like we are all dealing with the same issue.
I had a look at the Pelican part. I'm sure it works - but I cant work out which bit goes where. Does the spigot bit go into the trolley jack mount (is it inverted in the pic). The thing I find difficult is the irregularity of the underside of motor and trying to find suitable points to balance it on.
The adjustable transmission jack sounds good - if I knew what I was looking for.
Just trying to find a simple solution to an annoying problem (I have 3 911's/930's so pulling engines is a reasonably regular affair.) Want to simplify it.
Thanks
Alan