|
Sorry if I point you to the archives (search function) for an answer to your battery drain issues, but there's much useful information there.
Most battery cutoff switches mount directly onto the battery (negative post). Remove the ground wire, then install the cutoff switch onto the post. Reinstall the ground cable onto the switch. No additional cables/wires needed for a basic cutoff switch. However, using this switch will lose the radio presets and disconnect source voltage to your alarm system.
The cutoff switch will enable your battery to live while you diagnose the cause of the battery drain. In the meantime, invest in an inexpensive digital multimeter. This will be your main diagnostic tool.
Best wishes,
Sherwood
|