Thought I'd post this, as there was a recent light discussion on cables, including Monster Cable.
I dislike Monster Cable immensly. Partly due to there extreme tactics in dealing with businesses use use the word "Monster" for any product. I believe they even went after Disney for the Monster's Inc movie...
Monster.com, as well. And Monster Garage, too. And the Chicago Bears, and the Hansen Beverage company for "Monster Energy Drink"
Some info on thier strong-arm tactics...
http://www.sfgate.com/cgi-bin/article.cgi?file=/chronicle/archive/2004/11/08/BUG1J9N3C61.DTL&type=business
Well..they've gone after someone else, unaware that thier founder was a lawyer by trade...
Blue Jeans Cable Strikes Back - Response to Monster Cable
by Tom Andry — last modified April 17, 2008 05:58
Kurt... I am your father... and THAT is my cable...
Not long ago we reported that Monster Cable had issued a cease and desist letter to Blue Jeans Cable about their Tartan cables. Little did the lawyer drones over at Monster know that Kurt Denke, the president of Blue Jeans was, in a former life, a lawyer by trade. Oops! Someone pushed around the wrong "small" company! While we are no legal experts, we recognize humor when we see it. And this is funny. With Blue Jeans Cable's permission, we've included their full response to Monster's letter below. We even discussed it before its release on AV Rant. Kurt wants to keep this entire process completely open to the public and we're more than happy to oblige. Enjoy.
__________
RE: Your letter, received April Fools' Day
Dear Monster Lawyers,
Let me begin by stating, without equivocation, that I have no interest whatsoever in infringing upon any intellectual property belonging to Monster Cable. Indeed, the less my customers think my products resemble Monster's, in form or in function, the better.
I am evaluating your claim that the connectors on certain Tartan brand products infringe Monster's design patents and trademarks. However, the information supplied with your letter is plainly inadequate to support a claim of infringement and so I am writing to you to ask for further information and clarification regarding your claims.
I will begin by addressing your trademark/trade dress claim. You have referred to two trademark registrations, and have attached some printouts from the USPTO system but the depiction of the marks on the drawings provided is small and indistinct, making it difficult to determine exactly what the alleged resemblance is, and I need further information from you.
First, I need legible, scale drawings of the marks, preferably with dimensions shown on the drawing. To the extent that drawings are inadequate to show the nature of materials, finishes, print legends, colors and the like, I will also need examples of each of Monster Cable's actual uses of these marks in commerce; actual physical examples would be best, but photographic reproductions might do. As you will understand, these considerations are essential to any claim arising out of trade dress, as you are alleging in essence that there is a resemblance sufficient to cause confusion over the identity or origin of the goods, and no mere line-drawing can suffice.
Second, I will need copies of the trademark applications and any correspondence between the applicant and the USPTO in support of the applications.
Third, you have not identified the Monster Cable products in question, in actual use and distribution in commerce, whose trade dress you allege has been appropriated. I have reviewed Monster Cable's online materials and have examined connectors on various Monster Cable assemblies in local retail outlets and am unable to determine which, if any, of these are thought by Monster to represent use of these particular marks. I am also unable to determine from this review whether Monster Cable actually offers any product for sale to which the Tartan connectors are alleged to be particularly similar. My own sense of it, in looking at the connectors, has been that there is no similarity between the Tartan connectors and any of the many Monster Cable connectors beyond the general functional and conventional characteristics which all or nearly all solder-cup, mechanical-assembly, barrel-style RCA-type connectors share. It may be that there is some line of products to which you have intended to refer but which I have not found in Monster Cable's marketing materials or displays; but if so, you will need to show me specifically what product it is, and you will need to call to my attention the specific aspects of the connector design which you contend constitute unique Monster Cable trade dress, what the associated secondary meaning of those aspects of the trade dress is, and in what manner and by what characteristics you allege that this trade dress has been appropriated.
Fourth, if the dimensional characteristics of the connector as used in commerce vary from the dimensions of the scale drawing of your mark, I will need a proper scale drawing, with dimensions, of each version of the actual connector as used in commerce, as well as photographs of the connectors showing actual in-use finishes. If there is more than one such connector design in actual use by Monster Cable as to which appropriation of trade dress is alleged, of course, I will require this information for each and every such design.
On the basis of what I have seen, both in the USPTO documents you have sent and the actual appearance of Monster Cable connectors which I have observed in use in commerce, it does not appear to me that Monster Cable is in a position to advance a nonfrivolous claim for infringement of these marks. There simply is not sufficient resemblance between the Tartan connectors and any mark or any example of the marks' actual use that I can find to support such a claim. But if you have further information for me on that point, you are welcome to submit it.
You have also supplied me with partial documentation on five design patents which you claim these connectors infringe. I will begin by observing, first, that the five design patents are so very much unlike one another that it is very hard to imagine that any product could actually infringe more than one of them at a time; anything close enough to one of them to be deemed an infringement would, by that fact alone, be too dissimilar from the other four. The dissimilarity of the Tartan connector from each of them is readily evident.
I should add that, for the purpose of this letter, I am assuming that these patents are valid. This is in no way a concession of the point. In fact, this is a very significant and likely inaccurate assumption, and you should expect the patentability of these designs to be under attack if you commence an action for infringement.
The fact that you have presented me with five completely distinct design patents, I have to say, gives me pause. I would go over them and detail the differences between the Tartan connectors and those shown in the patents, but if you are taking the position that it appears you are taking, there might be very little point in discussing it with you. Take, for example, the patent you mark as Exhibit B. The connector shown there is substantially different from the Tartan connectors in every respect, unless one ignores design specifics and focuses on the core attributes of the connector which are dictated by function. If your view of Exhibit B is that it is to be construed broadly enough as to encompass the Tartan connector, it is very hard to imagine that there is such a thing as a solder-assembly style RCA plug which is not similarly, in your view, encompassed by this patent. And, needless to say, it is very hard to imagine that any court would ever adopt such a view of the patent's scope; if you file on this sort of basis, you are in Rule 11 frivolous-claim territory.
I will point out, though you are no doubt already well aware, that the gross morphology of the RCA plug is pretty well dictated by function. RCA plugs intended for soldering and assembly have certain attributes in common; their diameter is constrained by the need for the shell to fit over an internal set of solder points and cable clamp, and their length by the need to provide some room for cable end prep and attachment; they are generally radially symmetrical along the anterior/posterior axis owing to the need to accommodate both a round-profile cable and the round-profile RCA socket; the connector end is constrained by the standard dimensions of the RCA socket, and by the need, as the socket provides for no bayonet or screw attachment, to provide sufficient tension on insertion to maintain good mechanical and electrical contact; the barrel, grasped by the user for the purpose of insertion and removal, requires traction which is typically provided by raised or recessed rings, plastic inserts, knurling, or the like; and transition between the connector and the cable to which it is attached requires, in one form or another, a reduction in barrel size at the connector rear. It is my assumption, since you cite design patents only and no utility patents, that Monster Cable makes no claim here for any functional aspect of any of these designs; if I am wrong, please let me know what utility patents Monster Cable does hold, and what claims, if any, Monster asserts on the basis of those utility patents.