Hi Sherwood - in the cranking position, I do get power at the ignition switch, terminal 50.
I can still see power at the 1st 14 pole connector in the cdi box area. Then, following the yellow wire to the second pole connector - if the plug for the second pole connector is unplugged...I can see power at the yellow wire at the 2nd pole connector. If the 2nd pole connector plug is plugged in, then I no longer see power at the yellow wire....something happens when I plug in the plug into the 2nd pole connector.
Hope that makes sense.
Rob
Quote:
Originally Posted by 911pcars
I didn't see where you checked the ignition switch. The starter solenoid gets the yellow wire signal from terminal 50 on the switch in the cranking position.
Although not directly related, review the circuit diagram here that describes the ign. system. Mine's a '69, fairly close to yours.
http://members.rennlist.org/911pcars/RemoteStarter.htm
Hope this helps,
Sherwood |