This is the old crap engine pull out the car were it will dye.
This is the new engine made by Henry @ Supertech
Specs
CUSTOM BUILT TO 2.8 PERFORMANCE SPECS
2.8 9.5: 1 RS STYLE PISTONS AND CYLINDERS
2.2 CYLINDER HEADS FOR CARB ENGINE
2.4-2.7 7R CASE WITH CASE SAVERS & PISTON SQUIRTERS
2.7 CRANK (MAG , MICRO POLISHED, KNIFE EDGE CRANK ) 70.4MM stroke
FACTORY 911 ‘S’ CAMS 6800 RPM
STEEL HEAD STUDS
908 STYLE OIL PUMP WITH PUMP MODIFICATION
930 CHAIN TENSIONERS WITH CHAIN SAVERS
COMPLETE ENGINE BALANCE (TO 7400 RPM)
STEEL VALVE SPRING RETAINERS
35 MM INTAKE PORTS 35 MM EXHAUST
REBUILT ALTERNATOR
NEW RED FAN SHROUD
MODIFIDIED CYLINDER TIN
TAYLOR PLUG WIRES (BLACK)
SUPERTEC WIRE HOLDERS
WIRE HARNESS FOR EARLY CHASSIS
FACTORY COOLER FOR EARLY CHASSIS
PMO carburetor kit (40mm)
DOUGHERTY CAMS (custom)
TWIN PLUG CONVERSION
SUPERTEC VALVE SPRINGS
TITANIUM VALVE RETAINERS
REBUILT STARTER
SSI HEATER BOXES
M&K SPORT MUFFLER
PORTING 38MM INTAKE 37 EXHAUST
DRY FILM LUBRICATE ALL BEARINGS
FLYWHEEL/ CLUTCH
SUPERTEC HEAD STUDS
This is were it will go some day……
