|
I guess I am going to do the valve clearance check then. The only way I can get my deck height to the 1.0mm number is without copper base gaskets. otherwise the thinnest copper gaskets get me about 1.3 to 1.4mm on the deck height, I have done a search on omitting the base gaskets but it does not seem like something engine builders do.
__________________
76 911S Targa
An ex F1 driver, and Porsche fanatic (my stepfather) once told me that if you listen very carefully on a quiet night you can actually HEAR Porsches rusting in the garage!
|