|
Kevin, if you are still listening:
I made a pulling tool and got the bearing out. $10 in parts from OSH/Home Depot.
Note on that... I don't see why people suggested the 3" conduit coupler.. it ends up pushing on the seal face I think.. might as well pull on the id of the bearing.. the bearing is toast anyway.
1- I see the surface for pulling the new bearing in... now I just need to be sure not to pull on the inner race. I read somewhere to use the old bearing and tap in the new one... maybe I can keep them alined with a hose clamp. I could also us that setup as the push tool.
2 - then just need to figure out how to get the hub in.
|