Also, check this out from Canon:
Quote:
These units enable the transfer of image data from EOS digital SLR cameras through a wireless or wired network to an ftp server.
WFT-E1/E1A is compatible with EOS-1Ds Mark II, EOS-1D Mark II N, EOS 5D and EOS 30D. (EOS-1D Mark II and EOS 20D may require firmware update to enable Wireless LAN functionality).
WFT-E2/E2A is dedicated to the EOS-1D Mark III and gets its power from the camera and the antenna is embedded. The result is a decrease in weight from 165g to 75g and a similar decrease in size.
WFT-E3/E3A is dedicated to the EOS-40D
How easy are they to setup?
Wireless networking is relatively simple providing you have a good knowledge of IT and networking. The manuals and software that comes from the manufacturer are very good but you have to know what you're doing. If you have little or no knowledge of routers, FTP, Mac addresses and IP Configuration then it will be a learning curve and you may struggle.
|
http://www.systeminsight.co.uk/Canon_Wireless_Overview.htm