It was made by crown manufacturing in 73-74, it places the turbo opposite the starter, it does not have a wastegate, it uses the original fuel injection. The throttlebody is mounted to the inputside on the turbo, the original wiring harness will even reach, it oils out of the hole for the oil pressure sensor and remounts the sensor inlline to the turbo. the oil returns through a line into a special valve cover. only non bolt on work needed is to drill a couple holes for the air hoses to go through the sheetmetal, and for the return spring on the throttle body. I bought it off of the infamous IAN, if you are a rennlist member and have been for a while you know who i speak of, heh. OH !IT HAS HEAT EXCHANGERS!. the turbo it uses is quite worn, and i have never got it rebuilt. dont even ask, its not for sale, but, anyone who wants to make a similar setup can take a look at the pcis, i ahve taken, i have a couple on the motor and a couple off and a few pics form the instruction book.
http://members.aol.com/madd001//turbopic1.jpg
http://members.aol.com/madd001//turbopic2.jpg
http://members.aol.com/madd001//turbopic3.jpg
http://members.aol.com/madd001//turbopic4.jpg
http://members.aol.com/madd001//1.jpg
http://members.aol.com/madd001//2.jpg
http://members.aol.com/madd001//3.jpg
i could snap a few more pics if anyone really want to see more.
Paul