Quote:
Originally Posted by daepp
Thank you all so much - I appreciate it. I will check and get back to you.
To clarify - there is voltage on one pair of the contacts on the board (the silver metallic rectangles).
|
Which pair?
I see two diodes one in the middle next to the inscription KEPC-990-3 and one to the left installed at an angle.
Some meters have a diode test, it should beep when you check the leads then switch leads and you have no beep i.e. you should have a high resistance in one direction and a very low in the other.
Here is the catch, depending on the circuit and what the diode is connected to it can throw off this test.