|
I used the Loctite 574, but not many in here seems to like this product. many other uses the yamabond. The 574 was used by the factory. i think when you seal close to the main bearings and the trough going oil gallery in that aera, it must be the best product to use, because the engine oil will wash it out if it goes in the oil gallery - i'm sure it will go in the gallery a you seal directley around them. I used Isopropyl alcohol to final cleaning of the surfaces after checking the mating surfaces have absolutely no burs. I'm sure that the ceaning process is more important than choise of sealing product.
I have now driven at least 15000 km, with absolute no oil leaks ! and no sweading paper gaskets at all - It is completely dry !
Roslin
__________________
Porsche 911 SC 3.0
|