|
Hi there,
Most common answer to this I have heard is the wiring harness under the seats. From my understanding Porsche released an article on the issue and it is under a recall notice, aka no charge.
Have you recently taken the seats out of your car by chance? Only reason I ask is I did this to install a roll bar and had to turn the ignition on to steer it and it faulted the air bag.
I reset the light with the Durametric tool no problem. If you have a physical harness issue, this will only be a temp fix as the fault with create an error code soon after again.
Safety issue, not that I am aware of.
The airbag system is still active and the impact sensors are still operating. All that is telling you is that it doesn't know if you're belted into the car or not so its a warning.
Cheers
Aaron
|