[RWebb]

The electrical trip switch at the door end of my Genie chain drive G Door opener fell off. So I put it back on and tried for the right spot. WHile up there, I notic4ed thre was another trip switch at the motor end of the rail. I left it alone. Also, the rail at the door end was coming loose, so I screwed it back in - I also tightened the loose blots holding the thing together at that end and put green loctite on them.

Before, you just had to touch a button and the door would open all the way or close all the way.

Now, you have to hold the button down continuously to get it to close.

Any ideas?