[davisriley]

Seat removal is pretty simple. How I do mine is put the seat bottom at it's highest position, slide it all the way forward, undo the 4 6mm(I think) allen head bolts at the back of seat, slide seat back, undo the 2 at the front, lean the seat backwards into the rear seat area, disconnect the 2 harness's to the seat, and lift the seat out, being careful not to smack the sill on the way out. Make sure that you have a good allen head socket to undo the bolts, not a little key, as the bolts are pretty soft, and very easy to strip the heads out. But all in all, a pretty easy job.