|
abit off center
Join Date: Feb 2002
Location: At the Airport Kentwood, MI
Posts: 7,311
|
When you get it apart and if the cam turns ok in the tower, assemble the heads to the cam carrier first, then put in the cam, if all is still ok then put the heads/carrier/cam on as a unit and tighten it down. And make sure your carrier bearings surfaces are clean, nick free and lightly oiled. What sealer are you using between the heads and carrier?
__________________
______________________
Craig
G2Performance
Twinplug, head work, case savers, rockers arms, etc.
Last edited by cgarr; 08-23-2008 at 08:35 AM..
|