[OldTee]

Following up and a request for some advice.

I test fit one of the SC cams with the same results. Further examination led me to conclude the #2 web (second from the front of the engine) may be the problem. I can see thru a mirror where there was some rubbing from the previous cam. The aluminum is polished there and nowhere else. What are my options.

1. I can do nothing and figure the new steel cam will wear away any small problem with time.

2. I can hone that web and remove the slightest amount of material, then test fit and if good.... go.

3. I can remove the cam tower and have it line bored. Lawd knows where.

4. I can search out a used cam tower and hope it is in better shape than the one I have.

5. I can mortgage the house, farm, boat, airplane, wife and kids and buy a new one, even if they are available.

6. I might find I am misreading the whole situation and punt.

Option 2 appeals to me.

Comments.