|
abit off center
Join Date: Feb 2002
Location: At the Airport Kentwood, MI
Posts: 7,311
|
You could dye the bores, turn the cam and look for the bad spot, you might just be able to polish it out. Can you turn it by hand or only with a wrench past the one spot? Normally I would check it on my surface plate to see if it was twisted or warped but since it did not change when it was bolted up it may not be.
__________________
______________________
Craig
G2Performance
Twinplug, head work, case savers, rockers arms, etc.
Last edited by cgarr; 08-26-2008 at 08:24 AM..
|