|
356 Flywheel conversion to VW
Hi all, I have followed Duane Spencers book and had my 356 180mm Flywheel cut to fit a VW 200mm Kennedy stage 1 clutch at 4mm then 21.5mm cut and a 204.5 width with a 912/356 Scat Flywheel bolt and Kush Lock disk but it dont fit together.
I have about 3.5-4mm gap between the flywheel and the pressure plate when the disk is installed. It also look s like the disk is touching the flywheel nut.
Any ideas what has gone wrong?
Ren
|