[kodioneill]

Originally Posted by YTNUKLR

I recommend the ARP ring compressor. They are sized for only one piston size, but they work perfectly. and it's American-made.

http://store.summitracing.com/partdetail.asp?part=arp-901-9000

I have the 80, 84, 90, 95 and 98mm versions and so far that's done every motor I've built.

do you like the method of installing the pistons in the cylinders first then installing the wrist pin?
i prefer installing the cylinder over the piston with the piston connected to the rod.