|
Registered
Join Date: Mar 2003
Location: Darnestown, Maryland
Posts: 914
|
Ingo,
I've read thru a few threads and I believe (I'm not certain.) That the hammer must have a connector that can be used with various pigtails which are dependant on the car.
Do you have a picture of the connector on the hammer itself and do you know if there is a standard connector that would match it.
I would think that I could wire up a connector using your pin-out diagram in another thread. I believe you mentioned that the hammer has an 8 pin AMP connector.
Thanks for any help.
I am assuming that I could find someone in my area that has a hammer or worst case an independant shop.
__________________
Bill Miller
81 Targa Guards Red
3.6, M&K 1 out, S4 brakes
83 ROW CAB Rubinrot Metallic (RIP)
|