Quote:
Originally Posted by ischmitz
Bill.
I don't have a picture handy but you are right. The connector on the hammer itself is a standard 8-pin AMP. The matching plug can be bought at Digikey: Part # 205838-1 for the housing and part # 1658542-2 for the contacts.
I used that to make my own diagnostics cable with the AMP on one side and a LEMO connector on the other. The matching LEMO socket is hard-wired into my car.
Hope that helps,
Ingo
|
Thanks!
I ordered some parts from a salvage place today including an OBD1 19 pin and OBDII socket.
Also a bad DME unit and harness side pigtail so that we can make a breakout box.
A local "DORKI" is letting me barrow his hammer next week.
I ordered some parts from Pelican to re-seal the intake so I will be able to rule out most false air.
Can you help me find anything on Mixture adjustment and the Adaptation process?
I have an idea, but I am also sometime backwards in my assumption when working on these Bosch systems.
Thanks Again!
BTW, I bought the 19pin socket because I'm thinking about getting the Durametric software and pigtail. Also if I ever don't have acess to the real hammer, I could take it to a shop.