|
I'm still not sure what it is.
I rotated the engine on all 4 axis on stand and then it stuck again just before #1 TDC, with 4,5,6 facing down. If I'm not mistaken # 1 and #4 reach top at same time. I put a magnet into the cylinder #4 but noting attached. I've tried to get a borescope but can't seem to find someone who has one. I rotated again with 4,5,6 up and if rotated. If it is an aluminum washer then it may have layed flat. I'm going to get a borescope from e-bay before I am convinced it is the chains.
|