|
As you've probably noticed, the connector on the MPS is labeled with 7, 8, 10, and 15, so you know where the wires go on that end. The other end is the ECU plug, count across the plug to 7, 8, 10, and 15, those are the same as at the MPS. Use a DMM in continuity mode to identify each wire. Should take you about 2 minutes once you get the ECU out and the plug removed.
Take a look at the section on the wiring harness in my D-Jet parts web page for more information.
__________________
Brad Anders
Scottsdale, AZ
|