|
Registered
Join Date: Apr 2004
Location: Northern Arkansas
Posts: 4,482
|
rb
I have that machine myself, and yes, it seats the primers. I don't know if I would recommend it for a first press, I used a RCBS rock crusher for years.
You might try running single cartridge cases through every stage to get a feel for what's going on at every station. I remember I could feel a split case going through the sizing die with the single stage press, I'm not sure I could with the Dillon because so much is going on. They are a pretty well thought out machine, the '550' is the nominal rounds per hour it can turn out (if there was someone to keep the primer tubes full and keep supplies coming and going).
Jim
__________________
down to jap bikes that run and a dead Norton
|