[Falk930]

Hello vmb,

I am doing the same currently, maybe I am 2 steps more close to the final.
If the pictures show all your hardware, for sure you need some more stuff.

1: The rubber fittings from your OE intercooler with the small metall tube inside,
I guess you have them.
2: 2 spacer tubes, approx 100mm long, I can measure later for you.
3: 1 stud M8 approx 120mm, you can get in any hardware shop.
4: connection sheet to fix your RUF iC inlet on the IC, nothing special.
5: barn door outlet to turbo inlet tube... here you can go different routes.
I would use the 930 rubber bow, a aluminium reducer pipe with welded
on fitting for bypass valve.
2nd choice, buy the 965 rubber bow which has the bypass connection and
use a aluminium reducer pipe.

I can offer to build the 2 spacers and the aluminium reducer pipe for you,
I need to build 1 set for me anyway, all on self costs + shipping.
Only I cant do this fast, I may need time for this.

Or I can send you the drawings when they are ready.

*+ the angled fixing which screws on the coil support, check this carefully.
mine was not fitting and I needed to cut it and reweld it.

Falk