Quote:
Originally Posted by Capt. Carrera
The setup John describes will work for the subs. But there is much you may be leaving un-addressed. What seats are you using? PCA mandates your seats have holes for the shoulder belts (and sub if you're running a single sub.) Also, where are you mounting the inner lap belts?
And whatever you do, don't run the sub belt over the front of the seat bottom.
|
good questions
Seats = Cobra Imola's with shoulder harness holes and sub strap hole in seat pan.
inner lap belts = mounted to a BK type fitting that is "sandwiched" between the bottom of the seat mount and the top of the sliders. Also held in place by the bolt at that junction.
see
http://www.livermoreperformance.com/porsche_harness_mounts.html R 9004 and R 9005 parts
thanks
Craig