View Single Post
Marine8541 Marine8541 is offline
Porsche Technical
 
Join Date: Jan 2009
Location: CT
Posts: 18
The noise may also be from the release fork or the slave if coming from the outside of the car. The slave will make the noise from the end of the shaft being worn. Most likely it is from the fork or release bearing and should be replaced with the clutch kit as a whole.

Another noise that is common with the clutch is from the inside of the car.This would be from the pivot points of the clutch pedal. You can try and lube them first.

These parts in both areas have been updated.



Best Regards,
Scott Slauson
Old 01-11-2009, 04:47 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)