|
Thank you for hanging in there with me Gentlemen!
There is 230V across the top black and bottom black wires of the contactors.
the wires go:
Top black
below that blue (your 120)
below that white (neutral)
bottom black (load)
Just as you have them Bob
Top black: fed from main power
Blue: wired from NO on old temp controller
white: fed from main power
Bottom black: to strip to heaters
Heater toggle switch on front of board:
white: L2 on old temp controller
black: L1 which is bridged to C on old temp controller
I hope this helps more than confuses.
Please let me know if I need to bridge anything on the new controller. I suspect, like the old controller, I need to bridge black power to COM on the controller.
__________________
Tru6 Restoration & Design
|