[Jamie '92 968]

OK.
Have not done this before, but I had printed out a procedure a while ago.
I turned the ignition to ON.
Then pushed in the accelerator to the floor for about 3 seconds.
When the Chech Engine light started to blink I let go of the accelerator

OK, here's what I got...
1 short , 5 short, and then 1 long light.

After it did this sequence a bunch of times, I pushed the accelerator back in for about 3 seconds until it started to blink.

Then it gave 1 short followed by 1 long light.
I think this is the signal that it is done with the codes.
Pushing in the accelerator again only brought me back to the one short, one long sequence.

I turned the ignition off and was able to repeat the sequence again... twice.

Since I don't have a list of diagnostic codes, I'm dying to know what this means!