|
As mentioned the X-member bolts are your best option unless you go on-line. I think you will have a very hard time finding the 12mm x 75 (1.5) at any local suppliers. The 12mm I found stocked at various places were all 1.75 pitch. I found out the bellhousing bolts are too short(55) or too long(90) for my new engine stand. Mine is mounted so the mass is fairly centered for a complete long block and it turns much easier.
__________________
86 - 951 - Garrett dbb T3/T4R/Tial/Maxtronic -SOLD
91 - BMW 325 iX AWD, 5-spd Coupe, Lazur Blau Metallic-SOLD
86 - 951-K26/8, daily driver-SOLD
87 - 944S - Another daily driver-SOLD
|