[944_science]

I put everything back together, torqued fuel rail mounting bolts, jumped fuel pump and I'm leaking from injectors 1-3 at the intake. I opted not to replace o-rings and hats because they cleaned up well and didn't have any noticeable damage. Oh, and I used a bit of motor oil on the o-rings to lubricate before putting together. Has anyone had leaking problems after removing rail? Should I use some other lube when putting injectors into intake, it's possible the oil wasn't enough and the injectors aren't sitting right. Thinking I should have just replaced hats and o-ring to begin with. Any thoughts would be great.