|
Okay, update. Still no spark
- I took out the CD Box and cleaned connections.
- I removed the coil and ran the resistance test, still seeing ~4000 ohms between center of coil (4) and gound point (1). Spec on this is 650-790 so it is way off. Inside the coil was dirty and I cleaned it the best I could. Still seeing same numbers. I was told that the secondary resistance is not as important as the primary resistance test which I pass.
- I used a spark plug wire to do the telegraph test instead of my original setup, still no spark!
I am at a total loss. Everything points to the coil but it doesn't make sense that it went bad while the car was apart but worked before.
Jesse
76 911S
|