|
2WD or 4WD? The stud is splined and just pressed into the hub. See if you have enough clearance behind the hub for the stud to clear without taking the hub off. I can't remember if the dust shield is in the way. Whack it squarely with a BAH. Should pop out. If not then remove hub and press it out. When putting the new stud in, get splines lined up and pull it in with a lug bolt. Check torque frequently until it is finally seated.
__________________
Jim
1987 Carrera
2002 BMW 525ti
1997 Buell Cyclone cafe project
1998 Buell S1W: "Angriest motorcycle I've ever ridden."
Last edited by Dueller; 03-16-2009 at 09:22 AM..
|