|
I am next to positive that the stud will clear, and you will not have to remove the hub/bearing. Once you have the rotor off, just take you BFhammer, and give it a few whacks straight on, and it will pop right out, usually takes me 3-4 whacks. Pull it in with a lug nut, and a stack of washers, the first couple of washers center hole should be a littlle larger than the small section of the acorn on the lug nut . use anti seize. You may ruin the lug nut you use to pull it in, so grab a coule of spares just in case.
__________________
No left turn un stoned
|