Hello everyone.
Last night I installed the relay, something funny is happening now. I replaced the top yellow cable (6 fuse from front) for yellow cable on relay, and white for white (7 fuse), on the bottom of the fuses there was also a yellow cable on 6 fuse but a white and blue on the 7 fuse. Following the instructions I placed the yellow on the bottom 6 and the white (relay) for the white/blue on bottom 7 fuse. Then I connected the positive and the ground, I replaced the battery cables back and when I turned the lights on, on low beams only the right side headlight works, on high beams only the left side works and when I pull the high beam lever both head lights work.
Where did I screwed up?, I did it slowly and methodically, step by step as instructed.
I then mounted the H-4's and same thing, right on low beams, left on high, both pulling the lever.
If anybody can help, please I will be going back later to the car to try to fix this. Any help is most welcomed. Thank you.