|
Designer King
Join Date: Mar 2004
Location: Toronto, ON Canada
Posts: 5,499
|
Setting Cold Control Pressures under 10 Degrees
All the CIS charts go from 10C to 40C. For a warmed up engine, say on a 79, we always use the 40C figure, 3.2-3.6 bar, w/ vac line attached.
If we want to set the cold cp @ a temp less than 10C , say 0C, do we use the 10C figure, which is 1.2-1.6, or should we extrapolate downward to about .5 to 1 bar, which is what the chart would read if it were extended to that degree?
__________________
Paul
Yellow 77 Sunroof Coupe/cork interior; 3.2L SS '80 engine/10.3:1/No O2; Carrera Tensioners; 11 Blade Fan; Turbo tie rods; Bilstein B6; 28 tube Cooler; SSI, Dansk; MSD/Blaster; 16x7" Fuchs/205/50 Firestone Firehawk Indy 500s; PCA/UCR, MID9
Never leave well enough alone
Last edited by Paulporsche; 04-01-2009 at 05:21 AM..
|