|
Designer King
Join Date: Mar 2004
Location: Toronto, ON Canada
Posts: 5,499
|
It's not too bad, Ron--about 10C today and 13C tomorrow.
I understand what you are saying. I'm having difficulty expressing myself here. If I get a ccp reading that is "on the chart" when the temp is "on the chart" thats fine. But let's say the temps drop to 0C next week and I'm setting up the CPs. Do I use the lowest setting (which is for 10) or knock the plug even farther down to get a lower figure?
Ty is set up @ .8 bar which is about 1 bar below the 10C figure and yet his temps are probably seldom lower than 0C.
If a ccp is within the spec for 10C will it be lower if a reading is taken @ 0C? Or will it always be the figure for 10 no matter how much lower the temp goes?
__________________
Paul
Yellow 77 Sunroof Coupe/cork interior; 3.2L SS '80 engine/10.3:1/No O2; Carrera Tensioners; 11 Blade Fan; Turbo tie rods; Bilstein B6; 28 tube Cooler; SSI, Dansk; MSD/Blaster; 16x7" Fuchs/205/50 Firestone Firehawk Indy 500s; PCA/UCR, MID9
Never leave well enough alone
|