|
Just move the Thermostat. Typically it is a 4 wire setup. Run a new cable through the ceiling. It is all low voltage wiring (24 VDC). You then adjust the registers downstairs so that you get enough cooling without freezing everyone.
Just note the color code of the wires, and the marked terminals. The terminals are marked the same on the thermostat and the HVAC control board in the furnace & A/C.
__________________
James
The pessimist complains about the wind; the optimist expects it to change; the engineer adjusts the sails.- William Arthur Ward (1921-1994)
Red-beard for President, 2020
|