[Ericv]

I"ve probably read 12 pages of prevoius posts to try to solve my starter problem. I have a 70T with a 69E engine that I've been working on for a year. I'm to the point where I would like to fire it up. I've jumped terminal 30 to 50 and the starter engages fine. There's a steady supply of 12.4 volts going to terminal 30. The PO wired a starter relay in because he did not want to replace the ignition switch. The relay appears to be functioning correctly. There's 12.2volts going to the relay and when the starter button is pressed, the relay coil is energized and sends 12 volts out another wire. So, my question is this. Is the yellow wire that connects to terminal 50 tied in with the relay? When I press the start button, I get no voltage at the yellow wire which from what I read should engage the solenoid. Please help as I am not good with electrical connections. Thanks, Eric