Quote:
Originally Posted by MPDano
I have a Punch 12" Woofer rated at 150rms and 300max at 4ohms
Can I get a Punch 200 rated a 100w at 4ohms?
I know back in the day I ran a Punch 150 to push a 15" single sub and it hit hard. I know these amps are unrated, but does anyone have experience in these two combinations?
|
It's perfect. in 14.4V that amp is much stronger than that. Better to have too much power VS. too little so you don't overheat the coils thru distortion.
Plug it in and don't worry about it.
In my TBSS I have a P150HD old school running ONE new generation p12" 4 OHM (system impedance = 2Ohm) and it'll rip your head off at full tilt. The new drivers are amazingly easy to work with.
rjp