|
abit off center
Join Date: Feb 2002
Location: At the Airport Kentwood, MI
Posts: 7,311
|
Top end done! Back in the air!
Decided to pull the cylinders on the O-200 for a top end, new exhaust guides, ground valves, seats, new rings etc. Repaired the oil pump cover housing which was just about shot. Ran it up today and got 50# of pressure and 40# at idle, need about another 15 min on the ground then back in the air, finally!! We were getting around a quart of oil every 2 hours, the exhaust guides were really shot.
__________________
______________________
Craig
G2Performance
Twinplug, head work, case savers, rockers arms, etc.
|