Hello Porsche Folks,
I'm posting here so all the Porsche Folks don't hang me. As you Folks know, I own
Clown College 3.2, that's a 76 Targa with 87 Carrera Engine. Any way, I just put
a new timing belt on my 2004 PD VW Jetta Wagon. The PD engine is different
than the other TDI'S I've done in the past. The injection is done by a common rail
where it is injected by a electronic valve then compressed by a large cam before it is
injected. Very cool design. My problem is you have to remove the passengers motor
mount to get to the timing belt. Well the lower mount will not go back in, not enough
clearance. WTF, it came out almost by it's self. I've checked out the Bently, and it's
of no help. I've removed almost every thing I can, but still can't get clearance. I
even removed the timing belt again and could get the mount to go in, but then you
can't get to the belt tensioner to put the belt back on. Have any of you Guys encountered this problem. The damn Cockers are of no help.
Regards p930man
I know this is not the Jetta