|
can you locate the red/black wire that goes into the dme plug? If you can open it little bit and check for crank voltage to ground there with a exposed wire. It may be the pin that is bad. If you still have no voltage check for crank voltage at the switch on pin 50 if you have it there run a jumper from the switch pin 50 wire to the exposed red/black wire at pin 4 of the dme and see if she starts. In the mean time I will try and locate the 14 pin dme plug.
__________________
1984 Red NA/Sold
1984 Gray NA/Sold
1986 Red NA
1986 Gray NA
|