[sailchef]

When I pull motor mounts I jack up the engine until the bolt begins to budge skyward, barely moves. this would indicate no pressure on the bolt and, at this point, should come out very easy.

I've had my motor out a few times and know exactly where tp place a small 2"X4"X4" block of wood between the motor and jack to insure perfect balance. You can actually balance a 911 engine on the end of your jack with no problem, if the jack is located precisely at the balance point. I was actually amazed the first time I did this. You were probably off just a bit and thats why the engine tilted when you released the bolt.

Experience is what you get when you don't want it.

Glad it worked out for ya. Hope the tranny bolts come out easier.