View Single Post
BlackeyCoveR BlackeyCoveR is offline
Registered
 
Join Date: Jul 2009
Posts: 4
I made some progress so I thought I would post it;

- I was able to confirm the order (cupholders, stereo, CD's, Heat / AC control unit) via a tech bulletin I found on the web.
- You need to take the side panels off the lower unit in order to remove it. The heater comes out easily by removing 4 screws and 4 connections in the back. The lower unit CD holder and shelf pop right out.
- installing the cup holders is easy too. The V brackets I referenced are used to secure the cup holders in the top slot.

Now my issues are;
- I need to remove the stereo to route the Heat/AC control wires to the lower console. Trying to figure out how the stereo comes out...
- The Heat/AC control doesn't want to fit where the bulletin says it should (or anywhere else)! I am not sure if I need to take a Dremel to the tabs on the console, that are preventing it from seating. I don't want to go there!
- The Heat / AC control face plate looks like it will need some work too - like rounding out the lower corners.
Old 07-23-2009, 10:34 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)