[JMPRO]

I am beginning to think that Momo has screwed up the specs on the hubs. This is the third time recently, including mine that I have heard about the wheel being off center and no amount of jumping back and forth on the splines will make it right. I removed my old wheel that was perfectly straight and put on the Momo hub and wheel and no amount of ajustment will make it right . One spline to the right is too much, one spline to the left is to much. Could it be the hubs are splined just a few degrees off. I know about adjusting the steering rods, I just think it shouldn't have to be done. If the old wheel was straight then the new one should be too.