While trying not to think about the fact I now need to do a tb, wp, tensioner, etc., change
, I decided to try and figure out my electrical problems. I feel like sticking a hot poker in my eye when I try and read the wiring diagrams, so I figured I'd pick you guys' brains. Sorry for the quality of some of the pics, this is the best I could get, even after multiple attempts.
First, black wire with blue stripe. It comes out of the loom that is all taped up with factory black tape. It is melted beyond belief, that is why it looks like crap. It is not plugged in anywhere.
Second, 2 white wires coming out of connector V. It appears that either one or both used to go into the slot at the end of the arrow. One of them is connected to a red hot wire connector on its opposite end.
Third, a white wire with green stripe entering the firewall from the engine compartment, not plugged in anywhere.
Allen in AZ? Dano? You have an 81. If anyone else out there has an 82 Euro could you please look at your fuse panel and tell me where these wires are supposed to go? Thanks in advance guys.