|
Member 911 Anonymous
Join Date: Sep 2007
Location: Rancho Palos Verdes
Posts: 14,329
|
Yeap, that'll be it.
Caution, make certain the crimp is not falling apart.
I ended up using insulated male and female "Bullet" connectors. I had some shorting issues so was forced to solder mine crimps to allow for a good signal.
I understand from some that you do not want to solder, but in my case I had to,
__________________
'85 Carrera Targa
Factory Marble Grey/Black * Turbo Tail * 930 Steering Wheel* Sport Seats * 17" Fuchs (r) * 3.4 * 964 Cams * 915 * LSD * Factory SS * Turbo Tie Rods * Bilsteins * Euro Pre-Muff * SW Chip on 4K DME * NGK * Sienes GSK * Targa Body Brace
PCA/POC
|